Answer Key: Self-Test D-5.1
- Table 1 Answers
- L. Expanding finish cutter
- N. Grease cutter
- H. Grease C cutter
- C. Retrieving auger
- D. Funnel auger
- B. Four-blade sawtooth cutter
- G. Drop head auger
- M. Hook auger
- K. Spade cutter
- I. Spital bar cutter
- O. Sawtooth cutter
- J. Chain knocker
- A. Sharktooth cutter
- E. Straight auger
- F. Spiral sawtooth cutter
- d. Gloves and safety glasses with side shields
- b. Use short forward and reverse movements and allow the machine to work on the blockage.
- b. Video inspection machine
- d. Camera/transmitter on the end of the video inspection cable
- a. Depth of burial of the drain line
- c. The cable will mark the porcelain finish on the bowl surface.
- b. Plastic boot on the hooked foot of the tool
- b. The chuck is hand-tightened and loosened.
- a. Clockwise
- c. Place the machine in reverse to relax the tension on the cable.
- d. 28,000 kPa (4,000 psig)
- b. Closest downstream cleanout below the obstruction
- b. Stream cleaning machine
